Eccotemp 45HI Indoor 6.8 GPM Natural Gas Tankless Water Heater Vertical Bundle / Each

This model has been redesigned to activate at a lower flow rate of .8 GPM as well as updated self-diagnostics.

This bundle includes the Eccotemp 45HI-NG and the Eccotemp 4" Vertical Vent Kit Bundle.

The Eccotemp 45HI-NG is the largest indoor model of the Eccotemp tankless line. Rated at impressive 6.8 GPM and 150,000 BTU per hour, the 45HI-NG can meet all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications. The compact, wall mounted 45HI-NG is powered by natural gas. With its fully automated control system, the Eccotemp 45HI-NG is the ideal choice for any standard sized home.

Product Features:

CSA certified for US and Canadian use
Hot water capacity range: .8 - 6.8 GPM
45-degree rise: 6.8 GPM
50-degree rise: 5.0 GPM
70-degree rise: 3.4 GPM
Activation Flow .8 GPM
Natural Gas Powered
Digital display with simple controls and diagnostics
Energy Factor: 0.80
Energy rating: 82%
Maximum / Minimum gas rate: 19,800 - 150,000 BTUs
3/4ö Water Inlet & Outlet
3/4ö Gas Inlet
4ö Venting

Eccotemp 45HI-NG Dimensions:

Height 28"
Width 15"
Depth 7.5"
Weight approx. 38 lbs.
Shipping weight 39.7 lbs.

WhatÆs included:

110 volt UL listed power cord
10-year warranty on heat exchanger
5-year warranty on parts
T&P Relief Valve
Gas Shut Off Valve

IMPORTANT NOTE: Not recommended for elevation above 3000 ft and cannot be used for HYDRONIC SYSTEM, RECIRCULATING or FLOOR HEATING.

The Eccotemp 4" Vertical Vent Kit includes:

1 x 4" Rain cap
1 x 4" Top support/Storm collar
1 x 4" Adjustable roof flashing (normal 30-degree flashing)
1 x 4" Universal appliance adapter
1 x 4" Back flow preventer
1 x 4" Vertical drain pipe

Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.

You will need to determine how many additional feet of venting you need and purchase an additional Z-Vent straight pipe. There is a maximum vent run of 20Æ, subtracting 4Æ for every 90-degree elbow in the run. This vent kit does not include a condensation drain pipe. If you need one, they are available for purchase separately.